DUO-FLOW

Features:-
·	Timed, Speed and Probe modes.
·	24V to 240V machine signal.
·	Mains ON / OFF switch and indicator.
·	Selectable Single or Cyclic top up.
·	Fitted with 12V or 24V dc motors.
·	Installation kit included - order conductivity probe separately.

Version with 24VDC motor

The Duo-Flow unit provides total flexibility with accurate control. Detergent and rinse-aid controls are independently selectable for speed or time modes, with conductivity control for detergent.
This unit has been designed to operate on all types of industrial dishwashers including single tank, conveyor or flight machines.

Full installation kit supplied

This is a single pump dosing unit designed for dispensing detergent into dishwashers by conductivity control.

Full installation kit supplied.

Application:-
	2-H-97/LCC is compatible with any single tank or cycle type dishwasher
Operation:-
	With the continuous mains supply switched ON, the detergent pump is electronically controlled through a probe fitted into the main wash tank of the dishwashing machine. This probe continually monitors the condition of the detergent solution in the wash tank. The degree of concentration of detergent can be adjusted on the electronic control card. If the detergent pump fails to switch off because the set detergent concentration level is not reached, an overfeed alarm switches the pump off after a period of time, and the red alarm lamp flashes plus a buzzer sounds intermittently. The alarm time can be adjusted between 10 and 300 seconds. Fast priming of the detergent pump may be made by pressing the prime button.
Specification:-
·	IP65 plastic box.
·	Size: 200 x 105 x 115 mm
·	Weight: 1Kg.
·	Power:  230V / 50Hz.
·	Delivery rate: 150 ml per minute

Contact probe