|
|
Isolating Electronic Switch |
 |
|
|
Application:- |
| · |
Designed to connect
signals from contactors, relays, motors, mains supply circuits and
similar facilities to low power electronic control systems such as
computer peripherals |
| · |
Output is normally open
transistor configuration - suitable for microprocessor
applications |
| · |
Input signal range 24V
to 230V AC or DC |
| · |
|
| · |
|
| · |
|
|
Features:- |
| · |
Wires leadouts are at
one end for ease of installation |
| · |
Compact design: Height:
62mm Width: 20mm Length: 20mm |
| · |
Protects sensitive
electronic equipment from harsh input signals |
| · |
Creates a barrier of
over 1500V between signal input and output |
| |
|
| |
|
|
|
|
|
|
|
|
EUROLARM 2000
|
 |
|
|
Specifications:- |
| · |
IP65 Plastic Box
|
| · |
Weight: Size: 135
x 200 x 140mm |
| · |
Power: 230VAC |
|
|
This low-level alarm unit is designed for use with
RFE laundry or dosing units. It can also be used as an independent
warning device.
Six LED indicators are mounted on the front panel.
Each one is used to indicate the state of an input.
Operation:- The unit can detect up to six
inputs from low level float switches, in-line product detectors or other
normally open devices. When an alarm situation is detected the beacon
flashes and the appropriate RED LED illuminates to indicate which input
device is signalling the alarm. Normally open and normally closed volts
free outputs are provided to enable the unit to operate a remote sounder
or beacon or to be linked up to an RFE laundry or dosing units. |
|
|
|
Stainless steel wall mounted bottle brackets |
 |
|
 |
|
|
Holds a 5 Litre bottle |
|
Holds a 2.5 Litre bottle |
|
|
|
|
|
|
|
|
|
Accessories |
|
|
|
|
An extensive range of accessories is available. The
illustration shows a small sample. |
| · |
Suction
tubes: Supplied with stiffener for insertion into a product
drum. |
| · |
Feed
tubes: These provide a means to convey product from a pump to
the point of use. |
| · |
Foot
valves: Suitable for placing at the inlet of a product suction
tube. |
| · |
Tank
fittings: These provide a means to connect a hose to a tank.
Illustration shows 6mm, 8mm & 10mm size. These are available in
other sizes. |
| · |
Non-
return check valves: Usually used for rinse aid injection but
are suitable for other applications where back-flow must be
inhibited. |
|
|
Click in an item to enlarge. |
|
|
|
|
|
|
Contact probe |
 |
|
|
A traditional conductivity probe. For use with our range of conductivity
controllers. |
|
|
Visit our website
Click
here for contact information
